This article concerns the design of cross laminated timber floor, a floor made by stacking multiple layers of wood boards in alternating directions, which are then bonded together using a strong adhesive.
In the design of trusses, timber is another alternative that should be considered at the preliminary design stage. When dealing with a small-moderate span, timber trusses are largely economical and the expertise required for fabrication is far less relative to steel solutions
Timber posts are vertical elements, when utilized in any timber frame are principally subjected to both axial compressive actions and bending moments along one or both axes. In other words, a timber post is the equivalent of a column, but in this case the term ‘post’ refers to timber or steel.
Timber joists are one of the most basic structural elements found in many timber frame construction. They are closely spaced timber beams (typically in the range of (450-900mm) used to support a suspended ceiling, timber flooring or sheathings. In this article, we shall discuss the design procedure of timber joist. All advice given will be based on the guidance and recommendations of BS EN 1993-1-1:2004 Eurocode 5 Design of Timber Structures- Part 1-1: General common rules of buildings.