Introduction The subject of this post is the design of reinforced concrete columns to BS EN 1992-1-1 Eurocode 2: Design of Concrete Structures-Part 1-1: General…
Introduction Before a column can be designed, the actions to which it must support must be determined. This includes the axial compressive forces and bending…
Introduction Moment redistribution must not be confused with moment distribution, as the two terms are distinctly dissimilar in meaning. Moment distribution is an approximate method…
In this article, we are going to consider how to break down structures into simpler units called a ‘sub-frame’ that can be analyzed discretely.
Introduction With the continuous advancement of computer-based analysis within the field of structural engineering, the tools used for analysis by hand are becoming less relevant.…
Introduction The simplest form of spread foundations used in transferring loads from a structure into the soil is the pad foundation. They are basically required…
Introduction The concept of pile foundation is incomplete without discussing pile caps because the loads from the superstructure of a structure cannot be transferred directly on…
Introduction The subject of this post is the design of reinforced concrete beams to BS EN 1992-1-1- Eurocode 2: Design of Concrete Structures (part1-1): General…
Introduction The subject of this post is the design of one way spanning concrete slabs to BS EN 1992-1-1 – Eurocode 2: Design of Concrete…
Introduction This post serve as an introduction to the core concepts within the Eurocode, references will be particularly made to this post as it focus…