Flat slabs are reinforced concrete slabs supported directly on columns, without beams. They are sometimes thickened at the columns to form column drops.
Picture the scenario, you’ve been tasked with the design of a complex large stadium roof and interestingly you’ve just received your new state of the art structural analysis software package. It’s exciting and going to be a perfect chance to demonstrate what can be accomplished if you have the right technology.
Waffle slabs are not different from a ribbed slab, their design is indeed based on the same principle as the ribbed and troughed slab system.…
Punching shear is a failure mechanism of shallow concrete elements when subjected to concentrated forces. It arises when high concentrated loads are applied to smaller…
A column is considered slender when second-order effects ( i.e. additional effects caused by structural deformations) cannot be safely ignored in the analysis and design…
The subject of this post is the derivation of wind loads on buildings using Eurocode 1: Actions on Structures Part 1-4: General Actions- Wind Actions…
A structure does not only transfer gravitational forces to the ground, it must do so for several other lateral forces applied . The components that…
Spread foundations supporting two or more columns are classified as combined footings. Sometimes, it becomes necessary to combine the footing for two or more columns…
The last post was an introduction to the design of high-rise buildings, the main focus of that post was on the design considerations and how…
The strap foundation belongs to the family of spread foundation. It is very useful where the base for an exterior column must not project beyond…